I need a solution
Hi,
Due to some requirement I had to change the Master server IP address. However, since then I am unable to see the robot.
Oct 20 13:05:49 HMEL-BKP1 tldcd[896]: [ID 463080 daemon.notice] TLD(0) opening robotic path /dev/sg/c0tw500104f000b946fel0
Oct 20 13:05:49 HMEL-BKP1 tldcd[896]: [ID 295976 daemon.error] TLD(0) [896] robotic path /dev/sg/c0tw500104f000b946fel0 is not a character device
Oct 20 13:05:49 HMEL-BKP1 tldd[882]: [ID 136913 daemon.notice] DecodeQuery() Actual status: Unable to open robotic path
Oct 20 13:05:49 HMEL-BKP1 tldd[882]: [ID 795118 daemon.error] TLD(0) unavailable: initialization failed: Unable to open robotic path
I can see the Robot from OS level so I tried to build the SG driver and rebooted the server but I still can't see the robot.
From OS I can see the media changer
c2::500104f000b946fe med-changer connected configured unknown
# ./sgscan
/dev/sg/c0tw500104f000b94708l0: Tape (/dev/rmt/1): "HP Ultrium 5-SCSI"
/dev/sg/c0tw500104f000b9470bl0: Tape (/dev/rmt/0): "HP Ultrium 5-SCSI"
/dev/sg/c0tw500104f000b9470el0: Tape (/dev/rmt/2): "HP Ultrium 5-SCSI"
/dev/sg/c0tw500104f000b94711l0: Tape (/dev/rmt/3): "HP Ultrium 5-SCSI"
/dev/sg/c0tw500104f000b94714l0: Tape (/dev/rmt/4): "HP Ultrium 5-SCSI"
/dev/sg/c0tw500104f000b94717l0: Tape (/dev/rmt/5): "HP Ultrium 5-SCSI"
/dev/sg/c0tw500104f000b9471al0: Tape (/dev/rmt/7): "HP Ultrium 5-SCSI"
/dev/sg/c0tw500104f000b9471dl0: Tape (/dev/rmt/6): "HP Ultrium 5-SCSI"
#
I tried a clean SG build http://www.symantec.com/business/support/index?page=content&id=TECH31047 but no go...
Gurus I need urgent assistance
Megards
Mudasir
